Accessories

RFID GP-20

RFID GP-20

The GP20 is a high performance proximity reader featuring long range and small dimensions. The unit will run from any voltage from 5 to 13.5vdc. The GP20 features high read range at voltages as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control.The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, Clock/ Data and RS-232 serial ASCII output, making it easy to upgrade existing installations.


RFID GP-20

RFID GP-20

Fleet operator can monitor carried cargo weight of vehicles equipped with axle load sensors. Mounting sensor on each axle of the vehicle is not always possible from technical point of view and is not economically feasible. Front axle load which is created by the weight of the driver's cabin and vehicle engine is insignificant comparing with rear axle (rear bogie) load created by the weight of the vehicle body (loading platform) and carried cargo. That is why a single sensor should be mounted on the most loaded axle.


RFID Tags

RFID Tags

RFID Tags may either be read-only, having a factory-assigned serial number that is used as a key into a database, or may be read/write, where object-specific data can be written into the tag by the system user. Field programmable tags may be write-once, read-multiple; "blank" tags may be written with an electronic product code by the user.


iButton

iButton®

A highly durable chip with a unique address that is used for many purposes, such as building access, personal information, asset management, guard tours and tracking. Housed in a 16 mm aluminum or stainless steel can that looks like a watch battery, iButtons are small enough to be attached to a key fob or finger ring.


iButton® Reader

iButton® Reader

An iButton® reader or probe is a mechanical contact to an iButton device that provides the electrical connection to your 1-Wire host. For PC-based applications, the reader connects to your 1-Wire/iButton adapter.


Fuel Sensor

Fuel Sensor

Fuel level sensor is designed for precision fuel level measurement in all kinds of vehicle tanks, also in tanks of fixed installations. It can be used as a part of a fuel monitoring system or to substitute the standard fuel meter of a vehicle.


Temperature Sensor

Temperature Sensor

This 2m long One Wire Temperature Sensor has a waterproof probe and long wire shape, suitable for immersive temperature detection. The chip inside this sensor is the widely adopted. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances.


SOS Button

SOS Button

The SOS is a very simple personal alarm designed for the elderly or infirm to summon help. The SOS alarm is not just a panic button for a fall or accident but can also be used as an attack alarm in case of an intruder.


Relays

Relays

The immobilizer relay allows remote ignition or engine disabling via SMS or GPRS from your control center or any mobile phone or tablet.